Choice of category
Solder kits
Infrared
IrDA
LCD
G-LCD
Special offers
Fan articles
About
Help
  
Articles in this category
You are here: Fanshop -> Solder kits -> LCD

LCD Display 20x4 blue/white
Inverted and LED backgroundlighting
2006 29.00
The 20x4 LCD display of the Modding section as complete kit
with the blue/white display!

Following components are contained in the set:

Display 20x4 character
inverted with white characters on blue background
16 pole shielded data cable (approx. 150 cm)
100 ohms variable resistor
10 K variable resistor
4 pole PC power connector plug
25 pole SUB-D plug with metalized enclosure
Transparent heat shrink tube approx. 40 mm wide for the
lagging of the contrast and brightness controller PCB
Black heat shrink tube approx. 3.2 mm in diameter
approx. 30x20mm breadboard
Displayframe: 98 x 40 mm
Display PCB: 98 x 60 mm
Here's a solder guide for the LCD kit ...
Display kit without LCD
The Display kit without LCD
2051 11.00
The display kit of the Modding section without LCD!

Following components are contained in the set:

16 pole shielded data cable (approx. 150 cm)
100 ohms variable resistor
10 K variable resistor
4 pole PC power connector plug
25 pole SUB-D plug with metalized enclosure
Transparent heat shrink tube approx. 40 mm wide for the
lagging of the contrast and brightness controller PCB
Black heat shrink tube approx. 3.2 mm in diameter
approx. 30x20mm breadboard
Here's a solder guide for the LCD kit ...
USB power connector
The USB power connector cable kit for LC-Displays
2007 2.50
Several visitors asked me, how to get the power connection
for the LCDs best outward the case.
To solve this, it's possible to lead the 4-pole power plug
across a free slot bracket of the case.
Or just solder a simple adapter with this small kit
to use the 5 Volt power rail of an USB connector.
The solder guide is in the Modding section.

Following electronic components are contained in the set:
1x USB A-plug with approx. 1 meter cable
1x 4-pole 5.25 inch power connector plug
Here's a solder guide for the USB kit ...
LCD Acrylic front screen black
The black acrylic glass front screen
2009 4.50
This black acrylic front screen fits with or without the acrylic holder
for the 20x4 displays and have a laser cut-out of 99 x 41 mm.
The black front screen is suitably for all usual 20x4 displays with a
frame size of 98 x 40 mm (e.g. article no. 2003 or 2006).

Following components are contained in the scope of delivery:
Black acrylic front screen
External dimensions: approx. 120 x 89 x 3 mm (W/H/D)
Size of the cut-out: approx. 99 x 41 mm
Here's the acrylic assembly guidance with further pictures...
LCD Acrylic holder
The awesome acrylic holder for the 20x4 Displays
2008 25.00
For the 20x4 displays there's now also a beautiful acrylic holder,
which should be placed on the table beneath the PC monitor
that the display is at any time well visible.
The display holder is suitably for all usual 20x4 displays with a
frame size of 98 x 40 mm (e.g. article no. 2003 or 2006).

Following components are contained in the scope of delivery:
1x transparent acrylic holder, thermoformed with lasered cut-out
1x plastic wedge
2x assembly timber wedge
External dimensions: approx. 120 x 60 x 90 mm (W/D/H)
Size of the cut-out: approx. 99 x 41 mm
Here's the acrylic assembly guidance with further pictures...
LCD Acrylic holder black
The awesome acrylic holder for the 20x4 Displays in black
2019 25.00
NEW:
For the 20x4 displays there's now also a beautiful black acrylic holder,
which should be placed on the table beneath the PC monitor
that the display is at any time well visible.
The display holder is suitably for all usual 20x4 displays with a
frame size of 98 x 40 mm (e.g. article no. 2003 or 2006).

Following components are contained in the scope of delivery:
1x black acrylic holder, thermoformed with lasered cut-out
1x plastic wedge
2x assembly timber wedge
External dimensions: approx. 120 x 60 x 90 mm (W/D/H)
Size of the cut-out: approx. 99 x 41 mm
Here's the acrylic assembly guidance with further pictures...
LPT card pci
Plug & Play pci parallel port card
2015 19.00
This pci card is interesting for everyone, who like to use a display
without having a free LPT interface.

Owing to Plug & Play this pci interface card can be installed very simply
in operating systems like e.g. Windows 95/98/2000/XP.
After installation into the PC this card offers an additional
parallel port (1 x 25-pol SUB-D connector).

Note:
It's important that the software which you like to use with
the text or graphics display allows an adjustment of the address range,
because the card doesn't use the 378h address but an address assigned
by the operating system like e.g. A800.
To find out the used LPT port address after the installation,
please take a look into the device manager.
(properties of the printer connetion -> resources -> I/O range)

Most software like e.g. Smartie, jaLCDs, LCDHype, LCDInfo, etc.
supports an address change.
(LCDStudio 1.5 doesn't support it, but the newer LCDStudio 2.x software
supports an adjustment of the LPT port address!)

Alternatively it's possible to use the parallel port of the Motherboard
for the display and use this pci LPT card as LPT2 for the printer, etc.
LCD Display 20x2
Inverted and LED backgroundlighting
2004 25.00
The 20x2 LCD display of the Modding section as complete kit!

Following components are contained in the set:

Display 20x2 character
inverted with yellow-green characters on blue-violet background
16 pole shielded data cable (approx. 150 cm)
100 ohms variable resistor
10 K variable resistor
4 pole PC power connector plug
25 pole SUB-D plug with metalized enclosure
Transparent heat shrink tube approx. 40 mm wide for the
lagging of the contrast and brightness controller PCB
Black heat shrink tube approx. 3.2 mm in diameter
approx. 30x20mm breadboard
Displayframe: 95 x 36 mm
Display PCB: 116 x 37 mm
Here's a solder guide for the 20x2 LCD kit ...


Copyright 1999 - 2017 by www.ocinside.de